Rislone Product Range

Popular Rislone Engine Treatments, Transmission Treatments, Injector Cleaners, and Fuel Additives Product Range Review

The Rislone company is driven by the promise to give their customers control over their car’s health and performance. Even with today’s detergent fuels and modern oils, they believe taking care of your car is a commitment and a passion, and with over 90 years of experience and chemical engineering under their belt, you can trust that their products will help you boost your car’s performance to another level.

Their product are specially formulated to clean, enhance and condition – and leave your car performing at optimal levels.

This article covers the Rislone company and its product ranges primarily, but the information can be useful for other special occasions that you are seeking advice or a  memorable gift.

Within this article, I shall refer to frequently asked questions (FAQs), hints, tips, and affiliate linked product examples, to help you with your purchase.

Please note: “As an Amazon Associate I earn from qualifying purchases.”

Good luck with your search and thank you for taking the time to read my article which I am sure will be of assistance to you both now and in the future.

Here is an item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

TAKE ME TO AMAZON.COM

OR

TAKE ME TO AMAZON.CO.UK

Why Rislone Products?

There’s a lot riding on your vehicle. As one of the most expensive purchases you will make, your car, truck, van, or SUV needs to be taken care of to guarantee durability, performance, value, and safety. One important and often overlooked way to improve your engine, fuel system and oil is to use Rislone performance chemicals.

Their scientifically advanced engine products are formulated to take care of the unique and specific performance requirements of various systems in your vehicle with their class-leading chemicals for:

Engine + Oil Treatment — To keep your engine clean and your engine oil lubricating at peak levels.

Transmission Treatment — To help avoid leaks and slippage that can cause severe damage

Fuel Additives (Gasoline and Diesel) — To keep your fuel system clean and delivering optimal performance and efficiency.

It doesn’t matter if you’re driving a brand-new car or a classic hot rod. In all cases, they have the engine, oil, fuel, and transmission products that can help your car perform better. Their products allow you to maximize performance, or even recover the power that has been lost over the years due to usage and wear.

Easy to use, their engine treatment, fuel treatment, and diesel fuel additives give immediate improvements in performance that result in real gains:

Higher performance — You’ll get every last ounce of power out of your engine like the day it was made.

Better fuel economy — Clean engine, oil, and fuel systems mean lower friction and noticeably better fuel economy.

Greater durability — Your engine doesn’t have to work as hard when friction and internal drag are controlled.

Getting the most out of your vehicle is the best way to make the most of your hard-earned dollars. Don’t put up with sluggish performance, poor MPG, or a slipping transmission. Just one dose of their engine, fuel, and transmission formulas is often all it takes to return your vehicle to like-new condition. You can keep a supply on hand for all of your vehicles and be ready to treat symptoms the moment they appear, instead of waiting for them to become major problems. Rislone isn’t just about intervening in current problems – it’s also about preventing new ones.

The award-winning, industry-proven Rislone team of chemical engineers works to give you the best automotive additives on the market, so you can keep your car running like new. Whether you’re looking to maintain, boost, or extend your car’s performance, they create the perfect product to meet those goals — just ask millions of racing and off-road enthusiasts worldwide.

Rislone keeps your car’s performance in top shape so you can rest assured that it will get you where you need to be, whether it’s out to dinner, to the office, or through the track faster.

Rislone invites you to browse their catalog and choose the automotive treatment products you need. Rislone have been creating loyal customers for nearly 100 years and looks forward to adding you to the list of Rislone users who are getting the most out of their vehicle every day.

Remember, your car is what it eats. Make it Rislone. 

(Source)

Rislone Heritage

Rislone, one of the original automotive chemical additives, was introduced to the world back in 1921. Over the years, the Rislone company rose to international popularity, becoming a go-to for many famous users, such as the U.S. Navy, not to mention professional race teams of almost every stripe.
Rislone has continued to evolve alongside the industry’s automotive technological changes to provide its customers with the best performance products out there.
With over 90 years of experience under their belt, you can trust that Rislone’s revolutionary performance products will give your car a fighting chance at a long, healthy life.
Follow the growth of the Rislone company below and learn about some of their favorite highlights from their long history. (Source)

Here is an item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Motorsports

Rislone company fully supports the motorsports community both on the job and off. Rislone employees genuinely live the Rislone lifestyle — attending exciting extreme sporting events, spending their weekend off-roading on the dunes, and continuously supporting their favorite racing teams. (Source)

Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Engine Treatment Products

Your engine is the heart of your vehicle. Whether it’s a gas or diesel engine, you want the best performance, longevity, and reliability. The best way to ensure you’re getting all of this out of your engine is to consider the different ways that Rislone engine treatment products can benefit your car:

  • Maintenance: Taking care of your engine’s maintenance isn’t just about changing the oil and filters and fixing what breaks. It’s about using the best engine oil additive for maximum protection against wear and damage. At Rislone, they have spent nearly 100 years perfecting our unique engine treatment products to provide the best protection anywhere.
  • Performance: Engine performance is, in part, related to minimizing the amount of mechanical friction between moving parts. Build-up and deposits in your engine can increase this friction and rob power. Rislone engine treatment products improve lubrication, optimize your oil performance, and help remove any contamination to allow your engine to operate efficiently and develop maximum horsepower and torque.
  • Longevity: Whether your vehicle is brand-new or an older model that’s been around the block, you want to get as many miles out of it as possible. Choosing the best engine oil additive from Rislone allows you to return your engine’s internals to their best possible condition, which goes a long way toward extending its life and avoiding significant problems and failure.

Obviously, not every engine or driving situation is the same, which is why Rislone has created unique formulations for a variety of applications. Rislone has engine treatment products designed for getting the most power out of high-performance vehicles, optimal fuel economy out of your daily driver, and extending the life of classic cars that have been running for decades.

In just a few clicks, you can identify the best engine oil additive or treatment for your vehicle. Rislone gives you information on the intended use and expected results, along with technical datasheets. Rislone is confident in their engineering and products, thanks to our years of testing and feedback from their customers, who often see an improvement in just one use.

Once you’ve identified the products you’d like for your vehicle, find a store near you using their online locator. If you’d like to buy online, you can find our full Rislone catalog on Amazon.

Proven. Innovative. Effective. These aren’t just slogans — they’re how Rislone run their business and how they can offer you the best engine oil additives and engine treatments on the market.  (Source)

Here is an item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Transmission Stop-Slip Products

If you’ve never felt a slipping transmission, count yourself lucky—those who have known how unnerving and worrisome it is. When your automatic transmission starts slipping, you can both hear it and feel it and notice a deterioration in performance and responsiveness.

When your transmission starts to slip, you don’t have much time to take care of it before permanent damage is done.

Thankfully, Rislone carries an industry-proven, bestselling transmission stop slip product that is easy to use and gives you an instant improvement. Whether you’re in your garage getting ready to go to work or getting ready for vacation, having a transmission slipping quick fix in a simple ready-to-pour formula brings you a lot of peace of mind.

A slipping transmission can have several different causes:

  • Missing fluid: If your transmission or lines leak, your transmission fluid level can get low. When you don’t have enough fluid in your transmission, your transmission gears can suffer wear and slip quickly.
  • Overheating: In older vehicles, or vehicles that are overloaded (with passengers, luggage or trailer load), excess transmission heat is created. If this happens often or for an extended time, that heat can cause damage.
  • Fluid quality: Over time, transmission fluid (like all automotive fluids) can break down. At a certain point, it no longer provides the necessary lubrication to avoid gear and clutch wear and to slip.

The first step, if you have a slipping transmission, is to verify your fluid level. Inspect for leaks around the transmission seal and the various lines. Pay close attention to how your vehicle drives, and avoid driving it once you detect the transmission slipping. You risk doing permanent damage if you drive for long with transmission problems.

To get you back on the road quickly, at Rislone, they have spent nearly 100 years formulating our scientifically advanced automotive products. Rislone transmission stop-slip technology is designed to reduce slipping significantly with the first use. Rislone formula gets you back on the road and often helps you avoid costly transmission rebuilds or replacements.

Use the Rislone handy store locator to find the Rislone retailer nearest you. Having a bottle of Rislone’s transmission stop-slip on hand means you’re ready the moment you detect the slightest hint of transmission slipping in your vehicle and can start addressing the issue right away. (Source)

Rislone Fuel Treatment Products

Did you know that the health of your fuel injectors is one of the most significant factors related to your vehicle’s fuel economy and performance? Modern gasoline and diesel engine fuel injectors are high-precision components that carefully monitor and meter out your fuel. Even a small amount of debris in one of your injectors can cause problems with the drivability and fuel economy of your car.

Rislone has been formulating and manufacturing performance- and longevity-related automotive chemicals for nearly 100 years. At this time, Rislone has learned to listen to their customers and continuously work to improve their products. In the case of Rislone fuel injector cleaners and treatments, Rislone have formulated their products to:

  • Clean: Over time, impurities in gas and diesel fuel can create deposits inside your engine, and especially in the small apertures of your fuel injectors. Rislone fuel treatment products remove this debris to treat blockages and obstructions. Rislone products also help to chase out any water or other containments that may be present in your fuel and injectors.
  • Remove: Rislone not only need to remove debris from your injectors, but Rislone also needs to get it out safely and reliably. Their scientifically advanced gas and diesel treatments (which includes fuel injector cleaners) break dirt and debris down so that it can pass through the combustion process and safely be burnt off and expelled via the exhaust without harming your engine.
  • Protect: Once your car’s fuel injectors and fuel system are clean, you want them to stay that way. Rislone complete fuel system treatments help keep your entire fuel system cleaned, across a wide range of operating situations (commuting, racing, off-road driving) and weather conditions. Rislone have formulated their technology specifically for gasoline or diesel engines so that Rislone target the kind of injector problems inherent to your fuel type.
  • Win Awards: Both Rislone gasoline and diesel fuel treatment products have won the PTEN (Professional Tool and Equipment News) Innovation Award. Rislone wasn’t first to the fuel game, but Rislone took their time, so Rislone could be the best.

Modern vehicles are getting more power and increased fuel economy out of smaller engines. This power and economy are directly related to the amount of fuel getting into your engine. Choosing a Rislone gas or diesel fuel treatment product with a fuel injector cleaner allows you to do quick and affordable maintenance of your fuel system. Most of the Rislone customers notice a difference almost immediately, saying that Rislone formula works better than anything they’ve ever used.

Use the Rislone online locator to find a Rislone retailer near you. Rislone products are easy to use and will give you all the power, reliability, and fuel economy your engine can deliver. (Source)

Here is an item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone How-To Videos

We all know it’s essential to keep up with your health — whether you’re young, old, athletic, or not. But did you know it’s just as essential to keep up your car’s health? Maintenance, performance, and longevity can all be quickly and easily improved with the simple use of Rislone products.
Add Rislone to your regular maintenance routine and clean up those systems to give your car a fighting chance at a long life. After all, dozens of racing and off-road clubs can’t be wrong in making Rislone a regular part of their maintenance schedules.
Watch Bobby and Caitlin in Rislone how-to videos below to see how fast and easy it is to install Rislone products, engineered to clean, condition, and leave your car feeling brand new.
Still not sure which video to watch? Follow the Rislone Regimen guide to identify your car’s health goals and the Rislone product you need to reach them. (Source)

Rislone Safety Data Sheets

Below you will find links direct to the Rislone safety data sheets:

  • 100QR Engine Treatment (100QR) Open   Download
  • 4102 High-Mileage Engine Treatment (4102) Open   Download
  • 4104 Nano Prime™ Engine + Oil Performance Booster (4104) Open   Download
  • 4405 Rislone Hy-per Lube ZDDP Supplement (4405) Open   Download
  • 4416 Ring Seal Smoke Repair (4416) Open   Download
  • 4447 Compression Repair with Ring Seal (4447) Open   Download
  • 4471 High-Performance Oil Treatment (4471) Open   Download
  • 4502 Transmission Stop Slip with Leak Repair (4502) Open   Download
  • 4700 Complete Gasoline Fuel System Treatment (4700) Open   Download
  • 4700 Complete Gasoline Fuel System Treatment (4700) Open   Download
  • 4701 Fuel Injector Cleaner – 6 Oz. (4701) Open   Download
  • 4732 Fuel Injector Cleaner – 32 Oz. (4732) Open   Download
  • 4740 Diesel Fuel System Treatment (4740) Open   Download
  • 4740 Diesel Fuel System Treatment (4740) Open   Download
  • 4747 Super Concentrated Octane Booster (4747) Open   Download

(Source)

Here is an item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Safety Data Sheets

Below you will find links direct to the Rislone techincal data sheets:

  • 100QR Engine Treatment (100QR) Open   Download
  • 4102 High-Mileage Engine Treatment (4102) Open   Download
  • 4104 Nano Prime™ Engine + Oil Performance Booster (4104) Open   Download
  • 4405 Rislone Hy-per Lube ZDDP Supplement (4405) Open   Download
  • 4416 Ring Seal Smoke Repair (4416) Open   Download
  • 4447 Compression Repair with Ring Seal (4447) Open   Download
  • 4471 High-Performance Oil Treatment (4471) Open   Download
  • 4502 Transmission Stop Slip with Leak Repair (4502) Open   Download
  • 4700 Complete Gasoline Fuel System Treatment (4700) Open   Download
  • 4701 Fuel Injector Cleaner – 6 Oz. (4701) Open   Download
  • 4732 Fuel Injector Cleaner – 32 Oz. (4732) Open   Download
  • 4740 Diesel Fuel System Treatment (4740) Open   Download
  • 4747 Super Concentrated Octane Booster (4747) Open   Download

(Source)

Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone ‘Contact Us’ Page Details

Rislone would love to hear from you! You can use the form below to contact Rislone. Don’t forget to check out the Rislone support section for product details and technical info (Source)

Here is an item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone 4405 Yellow Pack of 1 Engine Oil Supplement Concentrate with Zinc Treatment-11 fl oz

Hy-per Lube by Rislone Concentrated Oil Supplement with Zinc Treatment is a petroleum oil performance supplement “booster” containing ZDDP (zinc dialkyldithiophosphate). Zinc and Phosphorus EP (extreme pressure) additives help protect internal engine components including pistons, flat tappet camshafts, lifters, pushrod tips and the rest of the valve train. High performance formula stabilizes the motor oil to ensure against viscosity and thermal breakdown. Reduces friction and wear, especially at start-up, helping to eliminate dry starts. Less friction means less wear and a cooler running, longer lasting engine. Makes newer oils work in older engines.

  • Prevents camshaft wear
  • Reduces piston scuffing
  • Increases engine life
  • Makes newer oils work in older engines

Legal Disclaimer:

INSTRUCTIONS / DOSAGE NOTE: Do not use as an engine break in additive. Rislone Engine Oil Supplement with Zinc Treatment contains the correct amount of ZDDP and other additives important to protecting your engine for everyday use. For best protection use with every oil change. Can be used during oil change, or added in-between oil changes. Do not overfill. PETROL ENGINES (Cars, UTES & Light Trucks) 1996 and older – Add one bottle to engine crankcase. 1997 to 2004 – Add approximately ½ bottle (162 mL) to engine. DIESEL ENGINES (Light, Medium & Heavy-Duty) 2006 and older – Add one bottle to engine crankcase for every 5 litres of oil capacity. OTHER APPLICATIONS For 4-stroke marine & motorcycles, agricultural, industrial and racing applications use 65 mL for every quart of capacity. (Source)

The Best ZDDP Supplement You Can Buy

As we get older, our bodies need extra vitamins and supplements to keep them running like they used to. Car engines aren’t much different – they still fall victim to wear and age. Modern conventional motor oils lack the metal protection older or high-performance engines require. That’s why we created the Rislone Hy-per Lube ZDDP Supplement. This product is a great performance booster that helps protect older internal engine components. Kind of like a multivitamin, right? Only this one has ZDDP, the best form of zinc and phosphorus protection available anywhere in the automotive world.

This high-performance formula stabilizes the motor oil to insure against viscosity and thermal breakdown. It also reduces friction and wear, especially at start-up, helping to eliminate dry starts. Less friction means less wear and a cooler-running, longer-lasting engine.

Why Choose Rislone’s ZDDP Supplement?

Most drivers know that having adequate engine oil is essential to the longevity and performance of your vehicle. But do you know what ZDDP is all about?

  • Anti-Wear and Corrosion Inhibitor: ZDDP is short for zinc dialkyl dithiophosphate, and is a combination of zinc and phosphorus. When put under pressure, ZDDP attaches to the metal surface and becomes a sacrificial wear material. Beyond being an anti-wear additive, it also is a corrosion inhibitor.
  • Modern Oils Have Reduced Zinc Levels: Modern motor oils have been updated to meet the needs of changing engine designs. This has led to a reduction of zinc in today’s oils, which means modern oils do not offer the protection needed for older engines.
  • What Does ZDDP Do, Anyway? Rislone Engine Oil Supplement with Zinc Treatment (ZDDP) cools and lubricates moving parts far better than oil alone. ZDDP clinging properties hold the oil to metal parts preventing wear and dry starts. Special additives also prevent oil thinning at high temperatures where standard oil fails.
  • Why Choose Rislone? Some ZDDP additives are designed for break-in use only. Other additives make wild claims about coating the inside of the engine with Teflon-type additives, but no real proof has been established to back up these claims. Rislone Engine Oil Supplement with Zinc Treatment uses proven ZDDP technology along with our 90 plus years of oil additive knowledge to protect the moving parts of your engine from being used after break-in.

Many products claim to protect your engine, but at Rislone, we’ve spent nearly a century proving it – on the highway and the racetrack. We have taken the time to study, formulate, and test our formulations in the lab and in the real world. We take customer feedback and usage data to improve our products. Today, we have some of the highest-performance engine oil treatments on the market.

To find Rislone Hy-per Lube ZDDP Supplement near you, use our online store locator.

Then, watch Bobby and Caitlin in the how-to video to see how easy it is to install this product, or contact our support team for more questions. Older and high-performance engines deserve a quality ZDDP additive. Feed them, Rislone part number: 4405

Dosage: Use as directed in gasoline & diesel engines, antique & classic cars, motorcycles (4 stroke except for wet clutch), tractors, agricultural & industrial machinery, and all racing applications 

Size: 11 fl.oz. (325 mL).

What is Rislone Hy-per Lube ZDDP Supplement?

Rislone Hy-per Lube Engine Oil ZDDP Supplement is a petroleum oil performance supplement “booster” containing high levels of ZDDP (zinc dialkyl dithiophosphate) Zinc and Phosphorus additives along with mixed esters to help better protect internal engine components including pistons, flat tappet camshafts, lifters, and the valvetrain. This is especially important at engine start-up when most wear is done. That is why they say one of the worst things you can do is start your engine. 

What is ZDDP?

ZDDP, also called ZDP, is short for zinc dialkyl dithiophosphate, is basically a combination of zinc and phosphorus. When put under pressure, like between a flat tappet camshaft and a lifter, it attaches to the metal surface and becomes a sacrificial wear material. Beyond being an anti-wear additive, it also is a corrosion inhibitor. 

Why do I need ZDDP?

Over the years, motor oils have been updated to meet the needs of changing engine designs. In the past, the oil companies were able to do this and keep the engine oil backward compatible, meaning this engine oil worked on new and old engines. However, now with the reduction of zinc in the oil, these oils sold today do not offer the protection needed for older engines.

How does Rislone Hy-per Lube ZDDP Supplement work? 

The common element between all of the engine components is the oil. Oil is the life-blood of the engine and is pumped under pressure to the internal parts. Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor oil must cool, provide corrosion protection, and a method of removing contaminants. The main parts needing oil for lubrication is the valvetrain, including the camshaft & lifters, bearings, and pistons. When installed, Rislone Engine Oil Supplement with Zinc Treatment cools and lubricates these moving parts better than oil alone. The clinging properties hold the oil to metal parts preventing wear and dry starts. Special additives also prevent oil thinning at high temperatures where normal oil fails. The ZDDP creates the sacrificial (disposable) layer on any component where metal to metal contact happens, preventing the metal itself from being worn away.

What are the benefits of Rislone Hy-per Lube ZDDP Supplement over other engine additives? 

Some additives are designed for break-in use only. Other additives make wild claims about coating the inside of the engine with Teflon type additives, but no real proof has been established to back up these claims. Rislone Engine Oil Supplement with Zinc Treatment uses proven ZDDP technology along with our 90 plus years of oil additive knowledge to protect the moving parts of your engine to be used after break-in.

Can I use Rislone Hy-per Lube ZDDP Supplement in my newer vehicle? 

No, you should not use Engine Oil Supplement with Zinc Treatment in 2005 and newer gasoline and 2007 and later diesel engines. Current oils have enough zinc to protect moving parts inside newer engines. However, to help prevent sludge and keep that engine clean, it is recommended to use Rislone Engine Treatment p/n 100QR or 4102 on all newer engines.

How is Rislone Hy-per Lube ZDDP Supplement different than break-in additives? 

Break-in additives contain incredibly high concentrations of ZDDP and are only designed to be left in the engine for a short period of time. Many of these additives don’t contain detergents or other lubricity additives essential to keeping your engine clean and lubricated for thousands of miles. Rislone Engine Oil Supplement with Zinc Treatment contains not only the correct amount of ZDDP, but also the other additives important to protecting your engine. Do not use it as a break in the additive.

How can the Rislone Hy-per Lube ZDDP Supplement help prevent dry starts?

Rislone Engine Oil Supplement with Zinc Treatment contains copolymer esters (Tackifier) that have an affinity (attraction) for metal surfaces. This allows the oil to hold onto the metal surface instead of just running off like normal motor oil does over time. This, along with the ZDDP creates a double layer of protection.

Will it work in synthetic oil?

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic formulas.

How much Rislone Hy-per Lube do I install? 

(Do not overfill)

GASOLINE ENGINES (Cars & Light Trucks)

1996 and older – Add one bottle to the engine crankcase.

1997 to 2004 – Add approximately 1⁄2 bottle (5.5 ounces) to the engine.

DIESEL ENGINES (Light, Medium & Heavy-Duty)

2006 and older – Add one bottle to engine crankcase for every 5 quarts of oil capacity.

OTHER APPLICATIONS

For 4-stroke marine & motorcycles (dry clutch only), agricultural, industrial, and racing applications use 2 ounces for every quart of capacity.

When should I add to my engine?

For best protection, use Rislone Engine Oil Supplement with Zinc Treatment with every oil change. It also can be used to top off oil as needed to improve engine protection between oil changes.

How long does Rislone Hy-per Lube ZDDP Supplement last? 

When used in combination with a good quality motor oil, Rislone Engine Oil Supplement with Zinc Treatment will last until your next oil change. Follow the manufacturers recommended oil change intervals for your particular vehicle and make sure to add with each oil change.

Can I use Rislone Hy-per Lube ZDDP Supplement in my diesel engine? 

Yes, it is recommended to use at a 7% ratio for all 2006 and older diesel engines. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Compression Repair with Ring Seal (4447) 16.9 fl oz

Compression Repair with Ring Sealer is a concentrated proprietary blend of petroleum additives developed for higher mileage engines that are suffering from decreased or uneven compression. Low compression can be caused by normal engine wear and decreased sealing between the piston rings and cylinders walls.

Legal Disclaimer

Works on ALL: 4, 5, 6, 8 and 10 cylinder vehicles Use on Any: Petrol or Diesel Engines Works with conventional, high kilometre and synthetic engine oil. DIRECTIONS: Add entire bottle of COMPRESSION REPAIR WITH RING SEAL to engine crankcase at or between oil changes. Do not overfill. Results will either be immediate or noticeable within a few days of driving. Install Compression Repair every 10,000 kilometres or with every oil change. Dosage One bottle treats 4 to 6 litres of oil.

  • Restores lost compression
  • Repairs blow-by
  • Frees sticky rings
  • Viscosity improver
  • Use on any gasoline or diesel engine. (Source)

Engine components can wear down over time, causing low compression and decreased power. That’s why we created the Rislone Compression Repair with Ring Seal. This product renews worn engines, rebuilds compression, restores lost power, and repairs engine blow-by. It’s liquid technology in a bottle.

Rislone Compression Repair with Ring Seal works by freeing sticky rings and filling gaps and scratches in cylinder walls, eliminating blow-by and compression loss while also reducing friction and wear. Not to mention, it does not contain any harmful lead or other metals that could damage the inside of your engine or be burned and contaminate emissions components and the environment.

Get Your Engine’s Groove Back: Rislone Compression Repair with Ring Sealer

Just like our bodies as we age, engine components can wear down over time, causing low compression and decreased power. That’s why we created the Rislone Compression Repair with Ring Seal. This product renews worn engines, rebuilds compression, restores lost power, and repairs engine blow-by. It’s like a boost to your car’s immune system. It’s liquid technology in a bottle.

The Rislone Compression Repair with Ring Seal works by freeing sticky rings and filling gaps and scratches in cylinder walls, eliminating blow-by and compression loss while also reducing friction and wear. Not to mention, it does not contain any harmful lead or other metals that could damage the inside of your engine or be burned and contaminate emissions components and the environment.

Reduce Engine Wear with Rislone

An automotive engine is complex. Hundreds of parts come together to make it run. It’s the movement of your pistons that creates the power necessary to move your car, and this movement relies on metallic rings around your pistons to keep the fuel mixture separate from the oil. The high speeds, temperatures, and pressures in your engine mean that your piston rings are under high stress.

Over time, your piston rings start to wear down, as do your pistons and cylinders (engine block) themselves. If the gap between these components gets too large, you can have several problems:

  • Increased oil consumption: A small amount of oil is needed to lubricate your pistons, but with wear, more and more oil can get past your piston rings and into the combustion chamber. This oil gets burnt off, reducing the amount of oil available for lubrication.
  • Loss of power: The ignition of fuel and air occurs when your pistons compress the mix in the combustion chamber. If your piston rings are too worn and no longer provide an adequate seal, your pistons can’t create the required compression for correct combustion. This is what we refer to as compression loss.
  • Damaging wear: The movement of your pistons and rings always creates wear, but this is exaggerated when your rings start to get too worn. This allows more significant movement (rocking) of your pistons, which in turn creates more wear. Once this starts, permanent engine damage can occur quickly.

What do you need to take away from this? The compression seal provided by your piston rings against your cylinders and pistons needs to be strong. Replacing your rings is a significant job, and involves a complete engine teardown. To avoid this costly and time-consuming job, we’ve created our Rislone Ring Sealer and Compression Engine Repair product.

Chemically formulated to recreate a piston ring seal, our ring sealer products couldn’t be easier to use. Most customers notice a difference after the first application. You’ll see less smoke, higher compression, better fuel economy, and more power that adds up to real savings over time.

In just a few clicks, you can use our locator and find a Rislone retailer near you. If you suspect you have piston ring sealing problems, there’s no need to worry. Here at Rislone, we have the proven and affordable solution to get your vehicle performing at full power and optimal economy again in no time!

All you have to do is follow our easy installation process, and you should begin to see results almost immediately. Remember: your car is what it eats. Make it Rislone.

Part number: 4447

Dosage: One bottle treats 4 to 6 quarts of oil.

Size: 16.9 Fl Oz. (500 mL).

What are the most common causes of low engine compression?

Low compression can be caused by normal engine wear and decreased sealing between the piston rings and cylinder walls. This can be the result of scratches in the cylinder walls or sticking rings in the pistons, which allow compression to move from the top of the cylinder down into the crankcase below the piston. 

What are the signs of decreased compression?

Some signs of decreased compression include loss of power, poor fuel mileage, oil consumption, blue smoke from the exhaust, plug fouling and engine noise or vibrations.

What is Rislone Compression Repair with Ring Seal?

Rislone Compression Repair with Ring Seal is a concentrated proprietary blend of petroleum additives developed for higher mileage engines that are suffering from decreased or uneven compression. It contains a unique engine additive that repairs worn-out areas in the cylinder wall, thereby restoring cylinder compression and improving engine performance to nearly new original condition. 

How does Rislone Compression Repair with Ring Seal work?

Rislone Compression Repair with Ring Seal works two ways to solve low compression problems. First, chemical polymers work to fill in scratches and grooves in cylinder walls caused by normal wear, age, and high mileage. Secondly, frees sticking rings in piston grooves to allow the rings to properly seal, increasing compression.

Will Rislone work in synthetic oil?

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic formulas.

Can I use Rislone Compression Repair in my diesel engine?

Yes, it is compatible with both gasoline and diesel engines.

How often should I use it?

For best results, install Compression Repair every 6,000 miles or with every oil change.

Can I use Rislone Compression Repair to mix with gasoline in my 2-cycle (Two-Stroke) Engine?

No, Rislone Compression Repair is designed to only be used with conventional 4 stroke engines.

Can Rislone Compression Repair be used in small engines like lawnmowers and tractors?

Yes, Rislone Compression Repair can be used in all types of 4-cycle (four-stroke) engines. Use approximately 3 ounces of Rislone Compression Repair per quart of engine capacity. Most small engines hold around 1 quart of oil.

Can Rislone Compression Repair be used in 4-cycle ATV and Motorcycle engines with a wet clutch?

Yes, Rislone Compression Repair can be used in 4-cycle (4-stroke) ATV’s and Motorcycles with a wet clutch since the product does not use any friction modifiers, which could potentially make the clutches slip. Use approximately 3 ounces of Rislone Compression Repair per quart of engine capacity.

Can Rislone Compression Repair be used in turbocharged engines?

Yes, Rislone Compression Repair can be used in all normally aspirated and turbocharged engines.

Does Rislone Compression Repair work in all 4, 6, and 8 cylinder engines?

Yes, Rislone Compression Repair works in all engine sizes. Some companies sell different size bottles for different size engines, which is only for marketing. In fact, most engines have the same exact oil capacity, whether it is a 4 cylinder or 8 cylinder does not matter. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Engine Treatment (100QR) 32 fl oz

Rislone Engine Treatment frees valves and lifters. Reduces friction and wear. Maintains oil viscosity. Cleans and conditions engines. Dissolves and removes harmful deposits.

  • Frees valves and lifters
  • Reduces friction and wear
  • Maintains oil viscosity
  • Cleans and conditions engines
  • Dissolves and removes harmful deposits. (Source)

This is it – the product that made Rislone famous. It used to be called “a tune-up in a bottle,” and was the very reason the phrase “tune-up” was invented. No joke — this is where all that started. Fast forward to today: eating clean and healthy foods ensures that our bodies perform at their best. The cleaner we keep our system, the better it runs. This is true for our cars as well. A cleaner engine is a better-lubricated engine with less friction and wear. Our famous, award-winning Rislone Engine Treatment does just that. This product contains high quality penetrating lubrication oil, combined with protective engine additives and special cleaning agents. It’s like a healthy diet for your car.

Its multi-grade formula allows oil to flow freely and provides protection over a broader temperature range. The unique Rislone Formula is designed to penetrate into valve seats, bearing surfaces, piston rings, and ring grooves, where sludge and varnish are likely to form. These deposits are gradually removed with the next oil change. There’s a reason it’s the #1 product chosen by race and off-road clubs.

Discover World-Class Engine Performance

Have you ever thought about cleaning your engine? We don’t mean the outside. We mean cleaning the inside, where years of oil, fuel and coolant use has created a buildup of sludge and debris. Cleaning all that out can allow your engine to run smoother, develop more power, and eliminate excess wear. The result is a more responsive engine that gives better fuel economy and will last longer.

There are several reasons why automotive engine sludge removal is important:

  • Oil starvation: When engine debris and sludge build up, it can starve certain areas of your engine of oil during operation. The moving parts of your engine, like the pistons and the crankshaft, need constant oil flow for lubrication. Sludge acts as a barrier to oil delivery and can cause problems.
  • Dirt and debris accumulation: While sludge itself can be considered dirt, it’s the solid particles that are trapped within that are the most dangerous. If they get pulled into the moving parts, they can damage and wear down metallic surfaces. Sludge doesn’t pass through your oil filter, and therefore can’t be cleaned.
  • Blockage: When sludge buildup is significant enough, it can start to block your oil pump and oil galleries. At this point, solid sludge can get pulled into your pistons and start to cause serious damage. Driven too long like this, engine sludge can destroy an engine, forcing costly and time-consuming repairs or even replacement.

Removing engine sludge is necessary to keep your engine running properly and giving you full power, maximum fuel economy, and increased longevity. Thanks to almost 100 years of experience in the business, we have perfected our engine treatments and cleaners. Our award-winning products are simple to use and often give noticeable results after the first application. They remove even thick sludge that otherwise could cause serious problems for your engine.

We’re proud of all our automotive chemicals, treatments, and cleaners. They’re proven, innovative, and effective. We apply this philosophy to everything we do. Thanks to our engine treatment products, you can give your engine the tuning and cleaning it needs to get it back to like-new condition.

Use our online store locator to find the retailer nearest you and pick up a bottle of Rislone Engine Treatment before your next oil change. Regular use of Rislone Engine Treatment, with oil and filter changes, will keep your engine components running smoothly. Watch Bobby and Caitlin in our how-to video to see how easy it is to install this product. Peak performance and car health have never been easier.

Part number: 100QR

Dosage: One Bottle Treats 4 to 6 Quarts of Oil

Size: 32 fl. oz. (946 mL).

Do I have to flush my oil after using Rislone Engine Treatment?

No, Rislone Engine Treatment is formulated to be left safely in the crankcase for the life of the oil change for maximum performance. It is not an engine flush and does not require draining.

Will Rislone Engine Treatment work in synthetic oil?

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic. Rislone is also safe for use with PTFE-based engine treatments and will not alter the PTFE coating.

How does Rislone Engine Treatment work?

Rislone Engine Treatment gradually dissolves and removes harmful deposits of varnish, sludge, and gum from the internal metal parts without plugging oil passages. These deposits form within engines and can alter tolerances, stick valves and rings, cause noisy valves and lifters, and plug oil screens and passages. Regular use of Rislone Engine Treatment, with oil and filter changes at the proper intervals, will keep such deposits to a minimum.

How much Rislone Engine Treatment do I install?

One bottle of 100QR Rislone Engine Treatment 1 quart (32 oz.) is designed to treat 4 to 6 quarts of oil; this allows you to replace a quart of motor oil at oil change time. You can also use it to “top off” or add to your system between oil changes. Do NOT overfill. For larger systems, stationary engines, and diesel trucks, use at 20% of engine oil capacity. For severely dirty engines, use two quarts of Rislone Engine Treatment and change the oil after 100 miles of driving.

Is Rislone Engine Treatment safe for my newer vehicle?

Yes, Rislone Engine Treatment has the lubricating and protective capabilities of current motor oils, plus additional penetrating properties that do a superior job of maintaining long-term cleanliness and deposit control. Use of Rislone Engine Treatment will not void your new car warranty.

Does Rislone Engine Treatment contain chlorine or any chlorine-like additives?

No, Rislone does not condone or produce any engine additive products with chlorine. We are aware of other additive companies which use chlorine, and it shows to reduce wear in laboratory testing, but can cause damage to engine bearings and other components in real-world driving.

How long does it take to start working?

Rislone Engine Treatment starts working the minute you install and start driving the vehicle to help remove harmful gum, sludge, and deposits from your engine.

I accidentally added the Rislone Engine Treatment into my gas tank, what should I do?

Rislone Engine Treatment is only designed to be added to the engine crankcase / where you add your engine oil. If the product is installed in the gas tank, the tank should be removed and cleaned out by a professional mechanic.

Can Rislone Engine Treatment be used in two-stroke engines?

No, it has not been tested or designed to be used in two-stroke engines, only four-stroke engines. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

High-Mileage Engine Treatment (4102) 16.9 fl oz

  • Reduces Friction & Wear
  • Quiets Noisy Lifters & Valves
  • Removes & Prevents Sludge
  • Keeps Engine Clean

Engineered Specifically for High-Mileage Engines

Young people and older folks aren’t the same: they need different things for optimal health. It’s the same with your car. New engines and older, high-mileage engines have different lubrication and cleaning requirements.

We talk to hundreds of customers every week, and one of the most common conversations we have is about high-mileage engines. How can it be cleaned? What protection does it need? How can it get back to running like it used to? How can I keep it on the road?

It such a common question that we developed the best high-mileage formula on the market: Rislone High-Mileage Engine Treatment. We took our legendary Rislone Engine Treatment – the one that’s been winning awards for decades – and specifically modified it for high-mileage engines. The result is better lubrication, better cleaning, and better protection for engines that have been around the block a time or two. You still get the patented Rislone additive and detergent package, just in a formula designed for higher-mileage applications. Whether you’re a regular daily commuter, a commercial driver, or run a fleet with high-mileage vehicles, you owe it to yourself to pick up a bottle of Rislone High-Mileage Engine Treatment.

Part number: 4102

dosage: In passenger car and light truck engines, use one bottle for a 4 to 6-quart system. For larger systems, stationary engines, and diesel trucks, use 1 bottle for every 5 quarts of oil capacity.

Size: 16.9 fl oz. (500 mL).

Do I have to flush my oil after using the Rislone Engine Treatment Concentrate?

No, Rislone Engine Treatment Concentrate is formulated to be left safely in the crankcase for the life of the oil change for maximum performance. It is not an engine flush and does not require draining.

Will Rislone Engine Treatment Concentrate work in synthetic oil?

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic. Rislone is also safe for use with PTFE-based engine treatments and will not alter the PTFE coating.

How does Rislone Engine Treatment Concentrate work?

Rislone Engine Treatment Concentrate gradually dissolves and removes harmful deposits of varnish, sludge, and gum from the internal metal parts without plugging oil passages. These deposits form within engines and can alter tolerances, stick valves and rings, cause noisy valves and lifters, and plug oil screens and passages. Regular use of Rislone Engine Treatment, with oil and filter changes at the proper intervals, will keep such deposits to a minimum.

How much Rislone Engine Treatment Concentrate do I install?

One bottle of 4102 Rislone Engine Treatment Concentrate 16.9 oz. is designed to treat 4 to 6 quarts of oil. For larger systems, stationary engines, and diesel trucks, use 1 bottle for every 5 quarts of oil capacity. For severely dirty engines, use 2 bottles (double dosage) of Rislone Engine Treatment Concentrate and change the oil and filter after 100 miles of driving.

Is Rislone Engine Treatment Concentrate safe for my newer vehicle?

Yes, Rislone Engine Treatment has the lubricating and protective capabilities of current motor oils, plus additional penetrating properties that do a superior job of maintaining long-term cleanliness and deposit control. Use of Rislone Engine Treatment will not void your new car warranty.

Does Rislone contain chlorine or any chlorine-like additives?

No, Rislone does not condone or produce any engine additive products with chlorine. We are aware of other additive companies which use chlorine, and it shows to reduce wear in laboratory testing, but can do damage to engine bearings and other components in real-world testing.

How long does it take to start working?

Rislone Engine Treatment Concentrate starts working the minute you install and start driving the vehicle to help remove harmful gum, sludge, and deposits from your engine.

I accidentally added the Rislone Engine Treatment into my gas tank, what should I do?

Rislone Engine Treatment is only designed to be added to the engine crankcase. If the product is installed in the gas tank, the tank should be removed and cleaned out by a professional mechanic. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone 4471 High Performance Oil Treatment – 15 fl oz

  • Fights friction and engine wear
  • Cushions and coats engine parts to reduce friction and wear by preventing metal-to-metal contact between moving parts
  • Quiets noisy engines
  • Improved high-performance formula performs better in both hot and cold weather
  • Increases low oil pressure

Rislone High-Performance Oil Treatment

Just because your car is older or has a lot of miles doesn’t mean it can’t perform like it used to. Remember the good old days? Get them back with a can of Rislone High-Performance Oil Treatment. This high-viscosity formula was specially developed for older and higher-mileage engines to improve their performance so you and your car can have many more good days. Performance doesn’t have to diminish with age, and we can prove it. We’ve been proving it for over 90 years.

This high-viscosity formula increases oil film thickness, building a thicker oil cushion and increasing oil pressure in mid- to high-mileage engines. Increased oil pressure equals increased power and a quieter-running engine. Not to mention, the Rislone High-Performance Oil Treatment cushions and coats engine internals to reduce friction and wear by preventing metal-to-metal contact between moving parts, giving your vehicle longer engine life.

Boost Your Oil and Achieve Higher Performance

Many Rislone customers are enthusiasts who want the best performance possible out of older cars like hot rods and classic cars. In fact, we’re a bunch of motorheads ourselves. Having adequate engine power to accelerate, merge, and pass is not only fun but is also safer. If your car, truck, van, or SUV feels underpowered, it leaves you feeling vulnerable on the road. Our Rislone High-Performance Oil Treatment is designed to restore top performance to your engine and make your car feel like new again.

The secret is our industry-proven, advanced formula that we’ve been perfecting for years. We have over 100 years of experience in creating and manufacturing a wide range of engine and fuel treatment products. While we’re proud of the quality and effectiveness of all our formulas, our high-performance oil treatment is an especially exciting product for high-mileage and older cars.

Designed to be quick and easy to use, you simply follow the instructions on the bottle and add the product to your engine oil. It works quickly together with your engine oil to give a performance boost that you feel after just a few miles. The benefits are:

  • More power: As your car ages, your engine can start to feel tired and sluggish. Our high-performance oil treatment is designed to restore full power conditions from your engine for added power under acceleration that you can feel every time.
  • More responsiveness: Responsiveness is the tendency for your vehicle to react quickly to changes in the throttle position. Older cars can start to be less responsive due to age, buildup, and wear. Our treatment returns the fast throttle response you’re used to.
  • More economy: While more power sounds like it means more fuel consumption, for regular driving, getting better performance means your engine doesn’t need to work as hard. This opens the door to noticeably increased fuel mileage (MPG).

Restore all the performance available from your engine with our Rislone High-Performance Oil Treatment. All that’s left is to locate the nearest store that sells Rislone products. Fast and easy to administer, most Rislone customers notice a difference after their first application.

Find out how Rislone has become a leader in engine oil treatment products with our affordable and effective High-Performance Oil Treatment. Grab yourself a can and watch Bobby and Caitlin in our how-to video to see how easy it is to give your engine a new life. All you have to do is feed it, Rislone!

Part number: 4471

Dosage: One can treats 4 to 5 quarts of oil.

Size: 15 fl. oz. (443 mL).

How does Rislone Oil Treatment work?

Rislone Oil Treatment is a high-viscosity formula developed for older and higher mileage engines to increase oil film thickness, building a thicker oil cushion, and increasing oil pressure in worn engines. This reduces friction and wears by preventing metal-to-metal contact between moving parts and quiets noisy engines. The new, improved “High-Performance” VI Viscosity Improver formula works great in both hot and cold weather.

When should I add Rislone Oil Treatment?

You can add Rislone Oil Treatment anytime, at or between oil changes.

How much Rislone Oil Treatment do I install?

One can of 4471 Rislone Oil Treatment (15 oz.) is designed to treat 4 to 6 quarts of oil. For larger systems, use 1 can for every 5 quarts of capacity. Do not overfill. On 4-Stroke ATV, Motorcycle and small engines, including wet clutch applications, use approximately 3 ounces per quart of oil capacity.

How long does it take to start working?

Rislone Oil Treatment starts working the minute you install and start driving the vehicle.

Can Rislone be used in the winter months for colder areas?

Yes, this product is formulated to be used in both summer and winter driving seasons.

Will Rislone work in synthetic oil?

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic.

What does 710 Seven Ten mean?

710 is actually the word OIL upside down.

Why do some vehicle manufacturers recommend against using oil additives?

Many vehicle manufacturers recommend against using additives, even though some sell them under their own brands, because of the quality of some of these products. Many aftermarket additives contain harmful chlorine-based chemicals or unproven additives like PTFE (Teflon), which we did not use in any of our Rislone products. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Nano Prime Synthetic Engine & Oil Additive – 16.9 fl oz

Nano prime is Rislone’s most advanced engine & oil additive ever – it’s unlike anything else on the market, period. Perfect for new and older vehicles. Rissole gives the extra protection needed for today’s lighter weight oils.

  • This unique Rislone additive uses a fully-formulated GF-5/son-rated synthetic motor oil carrier that is backwards-compatible with all vehicles
  • It contains a base synthetic oil to help improve mileage & performance while decreasing emissions
  • It is designed to work fully with all oil viscosity grades including ow-20, ow-30, 5W-20, 5W-30, 10W-30, 5W-40, 15W-40 and all others
  • This formula is enhanced with synthetic additives including: nan-tungsten and Moly friction Modifiers, anti-wear agents, and extreme pressure additives
  • Complete with Rislone famous detergent and dispersant package. (Source)

Rislone Nano Prime was years in the making – literally. With customers clamoring for a fully-synthetic Rislone engine + oil treatment, we took our time in research and development to bring you the most advanced engine treatment we have made – ever.

We think the results speak for themselves. See the overview tab below for more information on our Nano engine treatment and oil stabilizer.

  • Features MoS₂ with WS₂ Nano Technology
  • Increases Horsepower & Torque
  • Reduces Engine Friction, Heat & Wear
  • Repairs by Filling & Coating Rough and Worn Metal Surfaces
  • Cleans & Prevents Sludge

Rislone Nano Prime was years in the making – literally. With customers clamoring for a fully-synthetic Rislone engine + oil treatment, we took our time in research and development to bring you the most advanced engine treatment we have made – ever.

We think the results speak for themselves.

With patented nanotechnology in a fully synthetic oil that massively reduces friction and grants long-term protection to the metal in even the most demanding applications (racing, off-road driving, high-stress/high-temp commercial duty, stop & go traffic, etc.), Rislone Nano Prime is what you’ve been waiting for.

Fully synthetic Rislone Nano Prime – more power, more protection, better MPG, smoother and quieter operation. With almost 100 years in the performance chemical business, we’ve learned a thing or two.

And put it in this bottle.

Part number: 4104

Dosage: One bottle treats 4.5 to 7 quarts of oil for regular vehicles.

Size: 16.9 fl oz.

What is Rislone Nano Prime Engine & Oil Additive?

Rislone Nano Prime Engine & Oil Additive is a synthetic engine antifriction lubricant to help better protect internal engine components, including pistons, flat tappet camshafts, lifters, valvetrain, and all other parts. This is especially important at engine start-up, when most wear is done. That is why they say one of the worst things you can do is start your engine. 

Why do I need an Engine & Oil Additive? 

Engine oils have become very thin, almost as thin as water. This is in response to government mandates for increased mpg requirements, not to better lubricate the engine. This, along with newer start-stop technology, will increase wear, and decrease the longevity of your engine. Using Rislone Nano Prime Engine & Oil Additive will reduce this wear and increase the life of the engine.

How does Rislone Nano Prime Engine & Oil Additive work? 

The common element between all the engine components is the oil. Oil is the life-blood of the engine and is pumped under pressure to the internal parts. Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor oil must cool, provide corrosion protection, and be a method of removing contaminants. The main parts needing oil for lubrication are the valvetrain, including the camshaft & lifters, bearings, and pistons. When installed, Rislone Nano Prime Engine & Oil Additive reduces friction, which helps cool and lubricates these moving parts better than oil alone. The clinging properties hold the oil to metal parts preventing wear and dry starts. Special additives also prevent oil thinning at high temperatures where normal oil fails. The Nano Tungsten spheres create the sacrificial (disposable) layer on any component where metal to metal contact happens, preventing the metal itself from being worn away. These spheres contain many layers, sort of like an onion. When put under pressure, they can shed these Nano thin layers instead of that happening to internal engine parts. They fill and smooth rough and scratched surfaces. 

What is a Nano?

The International System of Units states that Nano is a “prefix” that means one Billionth. A nanometer is one-billionth of a meter; for comparison, a sheet of paper is 100,000 nanometers thick. These are exceptionally small particles allowing the oil to become a super lubricant. 

How much Rislone Nano Prime Engine & Oil Additive do I install? 

One bottle of Rislone Nano Prime Engine & Oil Additive is formulated to treat 4.5 to 7 quarts of oil for regular vehicles. For larger engines, use one bottle for every 6 quarts of capacity. On 4-stroke ATV, motorcycle, and other small engines, use approximately 3 ounces per quart of oil. Do NOT use in wet clutch applications, as this formula is too effective in reducing friction.

Will Rislone Nano Prime Engine & Oil Additive clog my filters?

No, this product will not clog your filters. Nano’s are smaller nearly 1000 times smaller than a single strand of hair, and they will pass through your filters without a problem.

Does Rislone contain chlorine or any chlorine-like additives? 

No, Rislone does not condone or produce any engine additive products with chlorine. We are aware of other additive companies which use chlorine, and it shows to reduce wear in laboratory testing, but can do damage to engine bearings and other components in the real world use.

How long does it take to start working? 

Rislone Nano Prime Engine & Oil Additive starts working the minute you install and start driving the vehicle to protect internal engine parts from damaging wear. 

Can I use Rislone Nano Prime Engine & Oil Additive in my newer vehicle? 

Yes, this formulation is designed to work equally well in new and older engines. Not only will you have a better lubricated & protected engine, but the product contains the tried and true Rislone detergent & dispersant cleaning package that help found the brand. The use of Rislone will not void your new car warranty.

Will it work in synthetic oil? 

Yes, this unique Rislone formulation uses a fully formulated GF-5 / SN rated synthetic motor oil that is compatible with all vehicles. 

Can it be used with regular petroleum motor oil? 

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic formulas. In fact, Rislone Nano Prime Engine & Oil Additive will turn regular petroleum oil into a premium synthetic blend. 

When should I add to my engine?

May be used anytime, at or between oil changes.

Will Rislone Nano Prime Engine & Oil Additive affect my oil grade?

No, this product will not change the grade of your oil.

How long does Rislone Nano Prime Engine & Oil Additive last? 

When used in combination with a good quality motor oil, Rislone Nano Prime Engine & Oil Additive is designed to be used once per year, or with every other oil change. 

Can I use Rislone Nano Prime Engine & Oil Additive in my diesel engine? 

Yes, it is recommended to use one bottle for every 6 quarts of oil capacity. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Ring Seal Smoke Repair (4416) 16 fl oz

16 OZ, Rissole Ring Seal 4416, Reduces Oil Burning, Exhaust Smoke and Exhaust Emissions, Quiets Noisy Engines and Cushions Worn Parts, Rissole Ring Seal Contains High Shear Polymers Which Provide A Seal For Worn Pistons and Rings To Help Regain Lost Compression, 1 Bottle Increases Viscosity, Helping To Prevent Blow By Gases From Fouling The Crankcase, Provides Protective Coating For Pistons, Rings and Bearings When Assembling Rebuilt Engines and Gear Boxes Because It Clings To and Protects All Metal Surfaces, Retains Excellent Oil Flow Characteristics In Cold Weather. (Source)

Rislone’s Bestselling Smoke Repair Formula

Do we see smoke? We can help. Our Ring Seal Smoke Repair is formulated to help stop blue exhaust smoke, reduce oil burning, and prevent plug fouling caused by blow-by. We talk to customers every day about this, so we know a thing or two about the problem, its cause, and how to fix it chemically.

Blow-by is usually caused by gaps in internal engine parts resulting from excess wear. Rislone’s Ring Seal Smoke Repair contains viscosity improvers that thicken the oil film, filling these gaps. It also provides a seal for worn pistons and rings and cushions engine parts to reduce wear and friction. In other words, it’s a car lifesaver in a bottle.

Make Rislone Your Car’s Lifeline

We’ve all seen smoking cars running down the road. If you’ve noticed increased dark smoke coming from your tailpipe, or seen increased oil consumption, your vehicle is probably burning oil. One of the most common causes of a smoking engine is a problem with your piston rings. When these precise seals start to wear, they allow the oil to pass through. This, in turn, means more oil in the combustion chamber than is necessary for lubrication, which leads to visible blue/black smoke from your exhaust.

Replacing your piston rings is a major job. It involves dismantling your engine and physically removing the pistons to replace the rings. Due to the cost, complexity, and time involved, you probably want to avoid this unless it’s absolutely necessary. For many cases, our engineers here have created our Ring Seal Smoke Repair product. We’ve spent nearly 100 years perfecting all sorts of automotive chemicals, additives, and treatments, including our technician-proven engine piston seal technology.

Every gasoline and diesel engine consumes a bit of oil. That’s normal. Oil is present to provide lubrication for the pistons and rings in the cylinders of your engine. Over time, as your piston rings and pistons wear, they start to allow more and more oil to seep through into the combustion chamber. This causes several problems:

  • Smoke: As oil burns, burned carbon releases a blue/black smoke that is visible to the naked eye. This is a pollutant that’s not only bad for the environment but can also keep your car from passing an emissions test.
  • Contamination: The presence of too much oil in your engine combustion can allow soot to build up in your catalytic converter, exhaust pipes, and mufflers. These are costly components to repair.
  • Consumption: Oil that’s making it past your piston rings is no longer in your engine to provide lubrication. Over time, your oil level will drop, and you’ll need to top-off your oil in between oil changes.

Aside from the environmental and cleanliness issues, a car engine smoking can case, the cost of modern engine oils is reason enough to act. Our affordable formulas are engineered to stop engine piston seal leaks and to keep your vehicle from smoking. 

Locate the nearest store with Rislone Ring Seal Smoke Repair products

and put an end to your smoking engine today. All you have to do is watch Bobby and Caitlin in our how-to video and follow along with our easy installation process. Your car will be back to normal before you know it! Remember: your car is what it eats. Make it Rislone.

Part number: 4416

Dosage: One bottle treats 4 to 6 quarts of oil.

Size: 16 fl. oz. (472mL).

How does Rislone Ring Seal Work?

Ring Seal contains viscosity modifiers and high-shear polymers which provide a seal for worn pistons and rings to stop blow-by. Viscosity improver cushions and coats engine parts helping to reduce wear and quiet noisy engines. 

How is blow-by caused?

Blow-by is usually caused by gaps in internal engine parts resulting from excess wear.

How long does it take to start working?

Results will either be immediate or noticeable within a few days of driving.

If the first application does not completely solve my problem, may I add another bottle?

Yes, for severe problems or badly worn rings, a second application is recommended.

Can I use Rislone Ring Seal in my diesel?

Yes, it works with all gasoline and diesel engines using conventional, high mileage and synthetic oil.

How much do I install?

One bottle treats 4 to 6 quarts of oil for regular 4, 6, and 8 cylinder engines. For larger engines, use one bottle for every 5 quarts of capacity. On 4-Stroke ATV, Motorcycle and small engines, including wet clutch applications, use approximately 3 ounces per quart of oil capacity.

How often should I add Rislone Ring Seal?

Add Ring Seal every 2,000 miles or with every oil change.

Will Rislone Ring Seal harm my engine?

No, the product is completely safe to use and will not harm any part of your engine. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone 4502 Transmission Stop Slip with Leak Repair-32 fl oz

Some real-world facts: automatic transmissions don’t work without fluid, nor do they work well without the correct fluid. And as it happens, these fluids are one of the most complex lubricants in your car.

Automatic transmission fluid must reduce friction enough to prevent wear and control temperature while at the same time allowing some friction to prevent the internal clutch material from slipping. Yeah, it works hard. Crazy hard. That’s why we created the Rislone Transmission Stop Slip with Leak Repair.

This transmission slip fluid contains a special blend of viscosity improvers, anti-wear friction modifiers, and extreme pressure performance additives to solve most transmission problems. These additives reduce rough shifting and friction while eliminating slip, controlling temperature and repairing shudder, chatter, and whining.

Slip No More: Rislone Transmission Stop Slip with Leak Repair

Do you know how our bodies can’t function correctly without the proper amount of fluids? Well, the same is true for your car. Automatic transmissions don’t work without fluid, nor do they work well without the correct fluid. And did we mention these fluids are one of the most complex lubricants in your car’s system?

Automatic transmission fluid must reduce friction enough to prevent wear and control temperature while at the same time allowing some friction to prevent the internal clutch material from slipping. Yeah, it works hard. Crazy hard. That’s why we created the Rislone Transmission Stop Slip with Leak Repair.

This product contains a special blend of viscosity improvers, anti-wear friction modifiers, and extreme pressure performance additives to solve most transmission problems. These additives reduce rough shifting and friction while eliminating slip, controlling temperature and repairing shudder, chatter, and whining.

The Best Transmission Additive for Slipping

A transmission leak is bad news, and a slipping transmission is worse news. The two together? It’s time to get working on a repair. By the time your transmission fluid has leaked enough to make your transmission slip, you’re already starting to damage the transmission internals. The cost of removing and repairing or replacing a modern automatic transmission is extremely high and can take a lot of time. Don’t let your car get to that stage. At the first sign of transmission slip or fluid leak, you need to react.

To make your life easier and to keep your vehicle on the road longer, our chemical engineers have been working for nearly 100 years to create effective, high-performance aftermarket chemicals and additives. One of our more popular products is our transmission additive for slipping. That’s because of the huge expense of repairing a transmission. The low price and ease-of-use of our transmission slip fluid make it an easy choice, especially for cases that are caught early where damage isn’t yet severe.

Transmission fluid leaks and slipping are a problem for several reasons:

  • Transmission fluid leaks can be hard to detect: Even a small leak can cause your transmission fluid level to drop quickly. You often don’t detect transmission fluid leaks when your vehicle is parked, due to a lack of pressure when it’s not operating. At warm temperatures and while driving, transmission fluid leaks can begin to drain your transmission fluid.
  • Low fluid can lead to transmission damage: We see this all the time. Running your transmission with low fluid is a definite no-no. Even if your vehicle should indicate a low fluid level on the dashboard, often by the time this happens, you’re already starting to do damage. In some cases, like on the highway, you can’t always get off right away to fix the leak or add more fluid.
  • A slipping transmission will only get worse: Unfortunately, once a transmission starts slipping, it won’t get better without intervention. Driving even at low speeds can cause serious and permanent damage. At the first sign that your transmission is slipping, you want to correct the problem to be sure your transmission doesn’t fail or cause you to have an accident.

This is where our Rislone Transmission Stop Slip with Leak Repair comes in. It’s simply the best transmission additive on the market, and it’s been proven through millions of bottles sold. We’ve formulated it with leak repair to offer you added value. One application allows you to stop any leaks and remove the slippage within your transmission. 

Locate your closest store to you right now with Rislone products and give your automatic transmission the attention it needs today! Your car, like your body, works hard to keep you going. Reward it by feeding it the good stuff. Watch Bobby and Caitlin in our how-to video and give your overworked transmission fluid some well-deserved help.

Part number: 4502

Dosage: One bottle will treat 12 to 16 quarts of transmission fluid. For compact and smaller vehicles, use ½ of the bottle.

Size: 32 fl. oz. (946ml).

How does Rislone Transmission Stop Slip with Leak Repair Work?

Rislone Transmission Stop Slip with Leak Repair contains a special blend of viscosity improvers, anti-wear friction modifiers, and extreme pressure performance additives to solve most transmission problems. These additives reduce rough shifting and friction while eliminating slip, controlling temperature, and repairing shudder, chatter, and whining.

How long does it take to start working?

Depending on the transmission problem, results will either be immediate or noticeable within a few days of driving.

If the first application does not completely solve my problem, may I add another bottle?

Yes, for severe problems or badly worn transmissions, use double the dosage or a second bottle. 

Will Rislone Transmission Stop Slip with Leak Repair work in my vehicle?

Yes, it works with any front-wheel drive, rear-wheel drive, all-wheel drive, and four-wheel drive transmissions. Do not use in CVT transmissions. Use in ALL light duty and heavy-duty vehicles including; car, truck, van, SUV, and RV’s with any 3 speed, 4 speed, 5 speed, 6 speed, electronic, overdrive, automatic or manual transmission. On manual transmissions, it will only help with leaks, noise, and hard or loose shifting, but not slipping.

Is it compatible with synthetic formulas? 

Yes, it is compatible with ALL types of domestic and import transmission fluid, including petroleum and synthetic formulas. 

How much do I install?

The 32 oz Rislone Transmission Stop Slip with Leak Repair, part number 4502, is designed to treat 12 to 16 quarts of transmission fluid. For compact and smaller vehicles, use ½ of the bottle. 

Can I use it in a manual/standard “stick” transmission?

Yes, the Rislone Transmission Stop Slip with Leak Repair will work in manual/standard “stick” transmissions to top off the fluid level to stop leaks, noise, and grinding gears. Will not help with slipping in manual transmissions.

Can I add to my existing transmission fluid?

Yes, remove transmission dipstick and check the fluid level. For most vehicles, this is usually done while the engine is running, and the transmission is in park. Tip: The transmission dipstick is usually located near the engine oil dipstick but further back into the engine compartment. Some vehicles do not have a normal dipstick. For those, the product has to be added to the transmission through a fill plug. Consult owner’s manual for location. If the fluid is low, pour entire contents of the bottle into the dipstick tube. Do NOT overfill. For compact and smaller vehicles, use ½ of the bottle. Tip. If necessary, to prevent overfill, drain some fluid from transmission. Check fluid level again. Top off with the manufacturer’s recommended transmission fluids as needed. Replace the dipstick and drive 10 to 15 minutes to circulate fluid. 

Will Rislone Transmission Stop Slip with Leak Repair harm my transmission?

No, the product is completely safe to use and will not harm any part of the transmission system. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone 4700 Complete Gasoline Fuel System Treatment 16.9 fl oz

Over time, poor or questionable gasoline can foul up your car’s fuel system. It’s important to keep this critical system clean, so your car can work at peak efficiency and power. Rislone Gasoline Fuel System Treatment is made to improve the quality of gas by increasing its cleaning ability, adding lubrication, removing contaminants, reducing spark knock, and helping to prevent the fuel from going bad. It’s far more than your average fuel injector cleaner — it’s one of the most awarded and popular fuel system treatments on the market. It’s even won a PTEN (Professional Tool & Equipment News) Innovation Award – a difficult task for a fuel treatment product.

One dual-cavity bottle contains the same amount of additives equal to a bottle of regular fuel injector cleaner, upper cylinder lubricant, fuel stabilizer, gas dryer, gas treatment, and octane booster. In other words, this is one powerful bottle. This formula increases power, performance, mileage, and saves you gas by cleaning and lubricating the complete fuel system. It also happens to be our most popular fuel treatment worldwide.

The Most Complete Formula Available: Rislone Hy-per Fuel Gasoline Fuel System Treatment

Over time, poor or questionable gasoline can foul up your car’s fuel system. It’s important to keep this critical system clean, so your car can work at peak efficiency and power. Rislone Hy-per Fuel Gasoline Fuel System Treatment is made to improve the quality of gas by increasing its cleaning ability, adding lubrication, removing contaminants, reducing spark knock, and helping to prevent the fuel from going bad. It’s far more than your average fuel injector cleaner — it’s one of the most awarded and popular fuel system treatments on the market. It’s even won a PTEN (Professional Tool & Equipment News Innovation Award – a difficult task for a fuel treatment product.

One dual-cavity bottle contains the same amount of additives equal to a bottle of regular fuel injector cleaner, upper cylinder lubricant, fuel stabilizer, gas dryer, gas treatment, and octane booster. In other words, this is one powerful bottle. This formula increases power, performance, mileage, and saves you gas by cleaning and lubricating the complete fuel system. It also happens to be our most popular fuel treatment worldwide.

Why Is Rislone Hy-per Fuel the Best Gasoline Additive?

One of the key factors to getting the most performance and economy out of your gasoline engine is to maintain the quality and cleanliness of your fuel system. Dirty, contaminated fuel can keep your engine from developing its maximum power. Water that gets into your gasoline can also can combustion problems that won’t go away on their own. The only way to return the full power and drivability of your engine is to use our most advanced gasoline fuel system treatment.

For nearly 100 years, our chemical engineers have been perfecting our automotive solutions through innovation and iteration. This has allowed us to create some of the best gasoline additives on the market. Our Rislone Hy-per Fuel Gasoline Fuel System Treatment gives several benefits:

  • It cleans: Our product is formulated with powerful cleaners that remove any dirt and contamination that had entered your fuel system. This includes your fuel tank, lines, and injectors. Once removed from your system, these contaminants are broken down and pass through the combustion process to leave your fuel system clean with no deposits or build-up.
  • It improves: Rislone Hy-per Fuel Gasoline Fuel System Treatment improves the quality of gas by increasing its cleaning ability, adding lubrication, removing contaminants, reducing spark knock, and helping to prevent the fuel from going bad. Simply put, it is the best all in one gasoline fuel additive money can buy.
  • It protects: We’ve taken care to engineer our gasoline engine additive not only to clean your fuel system and allow for improved performance and efficiency but also help keep it clean. You’ll be protecting your fuel system for the long-haul and working to increase the longevity and dependability of your engine. Start now with your new car, as well as your older vehicles.

We’re convinced that we have the best gasoline additive on the market, thanks to the positive feedback we have from our customers around the world. Find out just how fast, affordable and effective our gasoline fuel system treatment products are by locating a local retailer using our online locator. And installation could not be more straightforward. All you have to do is watch Bobby and Caitlin in our how-to video to see how quick and easy it is to use. Give your fuel system the treatment it deserves. Give it Rislone.

Part number: 4700

Dosage: Use One Bottle Every 5,000 Miles

Size: 16.9 fl oz. (500 ml).

What does Rislone Hy-per Fuel Gasoline Complete Fuel System Treatment do? 

Rislone Hy-per Fuel Gasoline Complete Fuel System Treatment improves the quality of gas by increasing its cleaning ability, adding lubrication, removing contaminants, reducing spark knock, and helping to prevent the fuel from going bad. Simply put, it is the best all in one gasoline fuel additive money can buy.

How does Rislone Hy-per Fuel Gasoline Complete Fuel System Treatment work? 

This one dual cavity bottle literally contains a combination of almost every type of gas additive on the market, including injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer & conditioner, dry gas, gas treatment, and octane booster.

How can this reduce a noisy fuel system?

The UCL (Upper Cylinder Lubricant) additive lubricates the fuel pump, injectors, and upper cylinder to reduce friction & wear, reducing noise.

How much will my fuel mileage improve?

This varies depending on the age of the vehicle, the quality of the fuel used, and how dirty the system is. It is normal for larger increases in MPG on the first dosage, and then it will usually taper off and flatten out from the second dosage on. For best results, use every 5,000 miles or with every oil change.

Will this work with all types of gasoline?

Yes, Rislone Hy-per Fuel Gasoline Complete Fuel System Treatment works with all regular unleaded, premium, oxygenated, and E10 E15 E85 ethanol containing flex fuels.

Will this harm the oxygen sensors or plug the catalytic converter?

No, this will not harm your engine or any emissions components, including catalytic converters, oxygen sensors, or the EGR valve.

How much do I use?

P/N 4700 / 16.9 fl oz bottle – Use anytime in a nearly full tank, or add to tank and then fill with up to 18 gallons of gas. For smaller tanks from 5 to 10 gallons, use 1/2 bottle pouring equal amounts from each side. Larger tanks use one bottle for every 16 gallons of gasoline.

How much will this help with my octane issue?

The product provides an average reduction of Octane Requirement Increase ORI by 2 numbers.

What does EZ Nozzle Spout mean?

The EZ Nozzle is the name for the patent-pending spout attached to the bottle. This allows the product to be safely and easily poured into all gas tanks, including capless (no gas cap) systems. Because it is designed like a regular fuel nozzle you would see at your gas station; it allows the product to work in all vehicles.

What is a capless fuel system?

Capless fuel systems go under a few names like Ford’s Easy Fuel System, but basically, it is a vehicle with no regular gas cap. Capless systems are on many vehicles, including Ford, Chrysler, Dodge, GM, Cadillac, and more. The reason the car companies are moving to this system is to prevent fuel evaporation and emissions issues if the gas cap is left loose, not installed, or is lost. Only Rislone fuel additives will work with all capless, obstructed, and regular fuel systems in cars and light trucks.

Can I use it in my intercooled, turbocharged, or direct-injected engine?

Yes, this is safe to use and works in all domestic and import turbocharged and directed injected gasoline (GDI) engines like the Ford EcoBoost, GM Ecotec, and all others.

Can I use it in E-85 ethanol in my flex-fuel vehicle?

Yes, Rislone Hy-per Fuel Gasoline Complete Fuel System Treatment works with the E-85 and will lubricate the fuel system reducing the adverse effects that ethanol has on the system.

Does it work with both fuel injected and carbureted engines?

Yes, this multi-vehicle formula works with all fuel injected, port fuel injection (PFI), direct-injected (DI / DIG), gasoline turbo direct-injected (GTDI), turbocharged and carbureted Engines. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone 4740 Diesel Fuel System Treatment – 16.9 fl oz

  • ULSD sulfur substitute lubricity additive
  • Cetane booster and diesel treatment
  • Fuel stabilizer and conditioner
  • Anti-gel cold flow improver
  • Contains the same number of additives equal to a bottle of regular fuel injector cleaner, upper cylinder lubricant, fuel stabilizer, anti-gel, diesel treatment and cetane booster.

Rislone Diesel Fuel System Treatment improves the quality of diesel fuel by increasing its cleaning ability, adding lubrication, removing contaminants, fighting corrosion and helping to prevent the fuel from gelling and going bad. Contains all the additives as a bottle of injector cleaner, anti-gel, fuel conditioner, cetane booster and upper cylinder lubricant. (Source)

Not the First, but the Best: Rislone Diesel Fuel System Treatment

Modern fuel systems, even with today’s fuel chemistry, need some help to remain at peak performance. Diesel engines are no exception. Our Rislone Complete Diesel Fuel System Treatment improves the quality of diesel fuel by increasing its cleaning ability, boosting Cetane, adding lubrication, removing contaminants, fighting corrosion, and helping to prevent the fuel from gelling and going bad.

This one dual-cavity bottle contains the same number of additives equal to a bottle of regular fuel injector cleaner, upper cylinder lubricant, fuel stabilizer, anti-gel, diesel treatment, and cetane booster. Talk about the perfect all-in-one! It also increases power, performance, and mileage and saves fuel by cleaning and lubricating the entire fuel system.

Discover the Best Diesel Fuel Treatment

There’s been a lot of talk in the news lately about diesel fuel. Long known for their low-end power and longevity, diesel engines also have a reputation as a “dirty” engine, due to the increased particulate emissions. While that’s not true, diesel engines are different than gasoline engines, and requirements to keep a diesel running in top shape are more specialized than you might think.

Specifically formulated for modern diesel engines, our diesel fuel cleaner works quickly to treat your diesel engine and to allow for the best possible diesel driving experience. Clean diesel emissions are not only good for the environment, but they also help keep the tailpipe and rear bumper of your car from turning black from diesel soot and particulate. This product works in multiple ways:

  • Loosens dirt: Diesel fuel can often have contaminants. Dirt and debris can quickly plug high-pressure diesel fuel ramps and injectors. Even a single blocked injector can make your engine run rough and lower its fuel economy.
  • Cleans the system: Once the dirt has been removed from your injectors, it has to be removed from your fuel system. Our advanced scientific formulation breaks down contaminants and allows them to be burnt off with your engine’s combustion.
  • Keeps your system running like new: When you add our diesel fuel cleaner to a tank of diesel fuel, the additive continues to treat and protect your entire fuel system. This includes boosting cetane levels, providing anti-gel protection, cleaning diesel fuel injectors, and stabilizing diesel fuel.

Once you’ve cleaned your diesel engine with our complete fuel system treatment, you’ll quickly see a difference. You’ll feel more power, better responsiveness, and a more stable idle. If you watch your fuel economy over several tanks, you’ll also see an increase in fuel mileage and lower fuel costs. Add in the increased longevity of your injectors and high-pressure fuel system, and you’re looking at real savings.

You get all of this with one simple product. We’ve spent nearly 100 years formulating and improving our automotive chemical solutions. This includes our high-performance diesel fuel system treatment. We’re an industry leader and offer the best diesel fuel treatment money can buy. 

Use our store locator to find the retailer nearest you that carries our products. Watch Bobby and Caitlin in our how-to video to see how easy it is to give that diesel fuel system the treatment it’s been looking for.

Part number: 4740

Dosage: Use One Bottle Every 5,000 Miles

Size: 16.9 fl oz. (500 ml).

What does the Rislone Diesel Fuel System Treatment do?

Rislone Diesel Fuel System Treatment improves the quality of diesel fuel by increasing its cleaning ability, adding lubrication, removing contaminants, fighting corrosion, and helping to prevent the fuel from gelling & going bad. Simply put, it is the best all in one diesel fuel additive money can buy.

How does Rislone Diesel Fuel System Treatment work?

It contains a combination of almost every type of diesel fuel additive on the market, including ULSD sulfur substitute, injector & complete fuel system cleaner, UCL pump & injector lubricant, anti-gel cold flow improver, fuel stabilizer & conditioner and Cetane booster & diesel treatment.

How can this reduce a noisy fuel system?

The UCL (Upper Cylinder Lubricant) additive lubricates the fuel pump, injectors, and upper cylinder to reduce friction & wear, reducing noise.

How much will my fuel mileage improve?

This varies depending on the age of the vehicle, the quality of the fuel used, and how dirty the system is. It is normal for larger increases in MPG on the first dosage, and then it will usually taper off and flatten out from the second dosage on. For best results, use every 5,000 miles or with every oil change.

Will this work with all types of Diesel Fuel?

Yes, Rislone Diesel Fuel System Treatment is designed to work with all diesel engines, including ULSD Ultra Low Sulfur Diesel and Bio Diesel Fuel.

Will this harm the catalytic converter or diesel particulate filters?

No, this will not harm your engine or any emissions components, including catalytic converters, particulate filters, EGR valve, or DEF systems.

How much do I use?

P/N 4740 / 16.9 ounce bottle – Pour entire bottle into the fuel tank. One bottle is concentrated to treat up to 35 gallons of diesel fuel. For larger vehicles, use one bottle per 30 gallons of fuel capacity.

How many points will it boost the Cetane level?

Typical numbers show a 1 to 2 point increase in Cetane level.

How low will it improve Cold Filter Plugging Point (CFPP)?

Typical results show up to 13°C (23°F) reduction in the Cold Filter Plugging Point (CFPP).

Can this replace the lubricant in the ULSD Ultra Low Sulfur Diesel Fuel?

Yes, Rislone Diesel Fuel System Treatment is an excellent lubricant and will replace the lost additives in the new reformulated diesel fuel.

What does EZ Nozzletm Spout mean?

The EZ Nozzle is the name for the patent-pending spout attached to the bottle. This allows the product to be safely and easily poured into all fuel tanks, including diesels with misfueling device systems. Because it is designed like a regular diesel fuel nozzle you would see at your fuel station; it allows the product to work in all vehicles.

Can I use it in my intercooled, turbocharged, or direct-injected engine?

Yes, this is safe to use and works in all domestic & import, car & truck regular, intercooled, turbocharged, and directed injected diesel engines like the Ford PowerStroke, GM Duramax, Dodge Ram Cummins, and all others.

What is a misfueling device?

Some diesel vehicles have a particular fuel tank receptacle that only allows a fuel station nozzle the specific size for diesel to be installed in the vehicle. This prevents accidentally adding gasoline to the vehicle. But this also makes it much more challenging to use additives in those vehicles. The Rislone Diesel Fuel System Treatment bottle contains a special spout that allows it to work in these vehicles. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone 4701 Fuel Injector Cleaner UCL – 6 fl oz

From the beginning, we engineered this formula to be better than your average fuel additive. With millions of bottles sold worldwide, we’d say we accomplished our mission.

This complete fuel injector cleaner helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation. Its high-performance additives increase power, performance, and mileage (MPG). You can use this product with all gasoline, ULSD diesel and E85 Flex-Fuel engines, as well as all unleaded, oxygenated, reformulated and biofuels.

Easily Keep Your Fuel Injectors Clean

Keeping your car’s fuel injectors clean is critical for maximum performance and the best fuel economy possible. Clean fuel injectors also mean your high-pressure fuel pump, and the system doesn’t need to work as hard, increasing longevity. If your car hasn’t had a fuel injector cleaning in a while, or if you’re starting to have problems with performance, sluggishness, throttle response, or fuel-efficiency, consider our 6 oz. Rislone Super Concentrated Fuel Injector Cleaner.

Designed with a special bottle for easy installation and no spilling, it only takes a moment to add our product to your fuel tank. In a short time, most of our customers see a difference, with a boost in power and less lag. Most vehicles find a more stable idle as well, as well as reduced engine noise. Our scientifically-advanced fuel injector cleaner is designed to get the most out of your engine and provide the smoothest fuel delivery possible.

Fuel systems and fuel injectors can get dirty for several reasons:

  • Contaminated fuel: While most gas stations provide clean fuel, it’s possible to get a bad batch of fuel or a dirty tank, pump, or nozzle. It doesn’t take much dirt to disrupt your fuel injectors, due to the small size of these holes, so even a small amount of dirt can cause a noticeable performance and efficiency problem under your hood.
  • Varying gasoline quality: Between various gasoline brands and seasonal fuel blends, the fuel your car gets can be inconsistent. With continued use of our super concentrated fuel injector cleaner, you can reduce carbon build-up, which causes pre-ignition, power loss, burned valves, and broken rings. Our technology also cleans injectors to reduce loss of fuel economy, hesitation, pinging (spark knock) and helps restore performance.
  • A clogged or malfunctioning fuel filter: Modern vehicles come with a fuel filter to remove most contaminants. In some cases, when your fuel filter gets clogged or damaged, particles can make it past and into your injectors. Make sure you replace your fuel filter according to the manufacturer’s recommendations.

In the end, it doesn’t matter how your fuel injectors and fuel system got dirty. What you want to know is how to clean it. With Rislone, it usually only takes one dose of our 6 oz. Fuel Injector Cleaner. This advanced product is designed to clean your injectors from the moment you pour the product into your tank, and it keeps cleaning as you drive.

To find a local supplier, use our online store locator to find a place near you to pick up your fuel injector cleaner with fuel lubricant today. Then, follow our easy installation process and give your car the boost it needs. Like millions of others, you’ll be impressed by the results.

Part number: 4701

Dosage: Pour entire bottle into the fuel tank. One bottle is concentrated to treat up to 20 gallons of gasoline or diesel fuel.

Size: 6 fl. oz. (177 ml).

What does Rislone Fuel Injector Cleaner do?

With continued use, it reduces carbon build-up, which causes pre-ignition, power loss, burned valves, and broken rings. It also cleans injectors to reduce loss of fuel economy, hesitation, pinging (spark knock) and helps restore performance.

How does Rislone Fuel Injector Cleaner work?

This product contains a unique blend of additives that clean & lubricate the entire fuel system, including the fuel pump, tank, lines, injectors, and even carburetors on older vehicles.

How can this reduce a noisy fuel system?

The UCL (Upper Cylinder Lubricant) additive lubricates the fuel pump, injectors, and upper cylinder to reduce friction & wear, reducing noise.

How much will my fuel mileage improve?

This varies depending on the age of the vehicle, the quality of the fuel used, and how dirty the system is. It is normal for larger increases in MPG on the first dosage, and then it will usually taper off and flatten out from the second dosage on. For best results, use with every tank of fuel.

Will this work with Diesel Fuel?

Yes, Rislone Fuel Injector Cleaner is designed to work with all diesel engines, including ULSD Ultra Low Sulfur Diesel and Bio Diesel Fuel.

Will this harm the oxygen sensors or plug the catalytic converter?

No, this will not harm your engine or any emissions components, including catalytic converters, oxygen sensors, or the EGR valve.

How much do I use?

P/N 4701 / 6 ounce bottle – Pour entire bottle into the fuel tank. One bottle is concentrated to treat up to 20 gallons of gasoline or diesel fuel. For smaller engines, use 1⁄4 bottle for every 5 gallons. For larger vehicles use 1 bottle per 18 gallons of fuel capacity or 1 oz per 3 gallons. NOTE: For vehicles with known fuel lubrication problems, double the dosage.

Can I use it in E-85 ethanol in my flex-fuel vehicle?

Yes, Rislone Fuel Injector Cleaner with Conditioner & Treatment works with the E-85 and will lubricate the fuel system reducing the negative effects that ethanol has on the system.

What does EZ Nozzle tm mean?

The EZ Nozzle is the name for the patent-pending spout end of the bottle. This allows the product to be safely and easily poured into all fuel tanks, including capless (no fuel cap) systems. Because it is designed like a regular fuel nozzle you would see at your gas station; it allows the product to work in all vehicles.

What does a flow valve do?

The flow valve is built into the EZ Nozzle neck of the bottle and delays the start of pouring to help prevent liquid from spilling and damaging the vehicle finish like other competitive brands.

Can I use it in my turbocharged or direct-injected engine?

Yes, this is safe to use and works in all domestic and import turbocharged and directed injected gasoline (GDI) and diesel engines like the Ford EcoBoost (gas) PowerStroke (diesel) and GM Ecotec (gas) Duramax (diesel), Dodge Cummins Ram (diesel) and all others.

What is a capless fuel system?

Capless fuel systems go under a few names like Ford’s Easy Fuel System, but basically, it is a vehicle with no regular gas cap. Capless systems are on many vehicles, including Ford, Chrysler, Dodge, GM, Cadillac, and more. The reason the car companies are moving to this system is to prevent fuel evaporation and emissions issues if the gas cap is left loose, not installed, or is lost. Only Rislone fuel additives will work with all capless, obstructed, and regular fuel systems in cars and light trucks.

Can this replace the lubricant in the ULSD Ultra Low Sulfur Diesel Fuel?

Yes, Rislone Fuel Injector Cleaner with UCL is an excellent lubricant and will replace the lost additives in the new reformulated diesel fuel.

Does it work with both fuel injected and carbureted engines?

Yes, this multi-vehicle formula works with all fuel injected, direct-injected, and carbureted engines. (Source

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone Fuel Injector Cleaner 32 fl oz Economy Bottle (4732)

From the outset, we engineered it to be far better than your average fuel additive. And we succeeded.

This complete fuel injector tune-up helps eliminate noisy injectors and fuel pumps, rough idle, hard starting, and hesitation. Its high-performance additives increase power, performance, mileage, and help save gas. You can use this product with all gasoline, ULSD diesel, and E85 Flex-Fuel engines, as well as all unleaded, oxygenated, reformulated, and biofuels.

Rislone Fuel Injector Cleaner (32 oz. Economy Bottle)

Rislone Fuel Injector Cleaner — the best all-around fuel additive to use with every tank of fuel. From the outset, we engineered it to be far better than your average fuel additive. And we succeeded.

This complete fuel injector tune-up helps eliminate noisy injectors and fuel pumps, rough idle, hard starting, and hesitation. Its high-performance additives increase power, performance, mileage, and help save gas. You can use this product with all gasoline, ULSD diesel, and E85 Flex-Fuel engines, as well as all unleaded, oxygenated, reformulated, and biofuels.

Discover the Best Fuel Injector Cleaner

Clean fuel injectors are critical for the smooth and efficient operation of your vehicle. In day-to-day use, we don’t think much about our injectors, but they’re high-precision components that occasionally need a little attention, even with modern gasoline. Due to varying fuel quality and cleanliness, injectors can get dirty or partially obstructed. And because of the tiny openings and high operating pressures of modern fuel injectors, even a tiny amount of dirt or contamination can cause problems.

If you’ve ever seen a quote for injector service, you know just how expensive it is. Injector service for gasoline or diesel engines requires training and specialized tools, which in turn means big bills. Before you take this step, give our Rislone Fuel Injector Cleaner a try. In most cases, one application is all it takes to clean your injectors and get your engine running like clockwork again.

What makes our fuel injector cleaner the best? We’ve created a formulation that combines powerful cleaning agents with a conditioning component that restores the power and efficiency of your engine quickly and for the long term:

  • Cleaning: With continued use, this specialized formula reduces carbon build-up, which causes pre-ignition, power loss, burned valves, and broken rings. It also cleans injectors to reduce loss of fuel economy, hesitation, pinging (spark knock) and helps restore performance.
  • Conditioning: The second step is conditioning your injectors and fuel for optimal flow and cleanliness. You’ll have more power under acceleration, a more stable idle, and improved fuel efficiency. This is because your fuel pump doesn’t have to work as hard to deliver the fuel, and it can meter out the exact amount of fuel called for by your engine’s computer. This is why we’ve added an upper cylinder lubricant (UCL) to this formula to help with ongoing conditioning.

Even if you don’t detect a problem with your fuel injectors, it’s worth giving them cleaning as part of general maintenance. Remove the beginnings of trapped dirt and contamination before it has a chance to accumulate and cause a problem. It only takes a minute to 

find your local Rislone retailer using our online locator

.We’ve become a leading automotive chemical supplier and are thrilled to have you discover the performance, effectiveness, and value of our fuel injector cleaner and conditioner. Pick up a bottle, follow our easy installation process, and give your car the boost it needs. You’ll be impressed by the results. Remember: your car is what it eats. Make it Rislone.

Part number: 4732

Dosage: One bottle treats 100 gallons of gasoline or diesel fuel. 

Size: 32 fl oz. (472 ml).

What does Rislone Fuel Injector Cleaner do?

With continued use, it reduces carbon build-up, which causes pre-ignition, power loss, burned valves, and broken rings. It also cleans injectors to reduce loss of fuel economy, hesitation, pinging (spark knock) and helps restore performance.

How does Rislone Fuel Injector Cleaner work?

This product contains a unique blend of additives that clean & lubricate the entire fuel system, including fuel tanks, line injectors, and even carburetors on older vehicles.

How can this reduce a noisy fuel system?

The UCL (Upper Cylinder Lubricant) additive lubricates the fuel pump, injectors, and upper cylinder to reduce friction & wear, reducing noise.

How much will my fuel mileage improve?

This varies depending on the age of the vehicle, the quality of the fuel used, and how dirty the system is. It is normal for larger increases in MPG on the first dosage, and then it will usually taper off and flatten out from the second dosage on. For best results, use with every tank of fuel.

Can this replace the lubricant in the ULSD Ultra Low Sulfur Diesel Fuel?

Yes, Rislone Fuel Injector Cleaner with Conditioner & Treatment is an excellent lubricant and will replace the lost additives in the new reformulated diesel fuel.

Will this harm the oxygen sensors or plug the catalytic converter?

No, this will not harm your engine or any emissions components, including catalytic converters, oxygen sensors, or the EGR valve.

How much do I use?

P/N 4732 / 32 ounce bottle – One bottle is concentrated to treat 100 gallons of gasoline or diesel fuel. For smaller & larger tanks, including bulk, add approximately 3 ounces for every 10 gallons of fuel.

Can I use it in E-85 ethanol in my flex-fuel vehicle?

Yes, Rislone Fuel Injector Cleaner with Conditioner & Treatment works with the E-85 and will lubricate the fuel system reducing the adverse effects that ethanol has on the system. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Rislone 4747 Super Concentrated Octane Booster, 6 fl oz

If you’re all about high performance, then you know your car, like your body, can use an energy boost from time to time. Our Rislone Super Concentrated Octane Booster does just that.

Rislone Super Concentrated Octane Booster increases your fuel’s octane rating to stop engine hesitation, knock and ping, while also improving power and performance. The formula works equally well on classic muscle cars, newer, smaller, harder-working engines, off-road, and racing applications. The increased octane allows the engine to run optimum spark timing, which not only creates more power but also, in many engines, reduces emissions and increases fuel mileage. It’s also the best insurance against bad gas you can find.

Discover Rislone for the Best Octane Booster on the Market

We’ve all heard the word “octane” as it pertains to automotive gasoline, but we don’t all know what it means. In simple terms, the octane value of a fuel relates to the amount of compression a fuel can handle before ignition. A higher-octane fuel will, therefore, compress more before ignition occurs, resulting in more power. Higher-octane fuels cost more because of this potential for more power and the cost to refine and produce it.

It makes sense, then, that a product that boosts the octane of your fuel will give you more power. That’s why our engineers have created our Super Concentrated Octane Booster. We want you to have a fast and easy way to boost the octane value of a tank of gas when you want added power. If you aren’t near a gas station that offers high-octane fuel, or you prefer to control the amount and quality of your additive carefully, our fuel octane booster is a perfect choice.

As with all our automotive chemicals, our gas octane booster is easy to use. The result is almost instantaneous. You get a noticeable boost, especially under hard acceleration. Many of our customers who race their cars on the track or drag strip always carry around a few bottles. Instead of having to wait until your tank is empty and search out a high-octane fuel pump, you can add a bottle to your tank anytime.

Proven. Innovative. Effective. These are the hallmarks of our Rislone automotive chemicals and additives and how we’ve been able to create the best octane booster we’ve tested on the market. To locate a nearby supplier, use our online store locator. Here’s a hint: you don’t even have to wait until you’re home to try it out! Simply add it to a full tank according to the instructions, and you’ll be ready to go. Once you get used to our octane additive, you’ll always want to have some handy. Use it on your long trips for added passing power and more comfort at cruising speeds. You can also try our gas octane booster at different times of the year and at different temperatures to see how your vehicle reacts.

There’s a reason high-end performance cars call for high-octane fuel. Give yourself the flexibility to enjoy high-octane boosted power whenever you want with Rislone. Grab a bottle, follow our easy installation process, and instantly enjoy an affordable, increased octane rating.

Remember: your car is what it eats. Make it Rislone.

Part number: 4747

Dosage: One bottle is concentrated to treat up to 20 gallons of gasoline. For small engines, use ¼ bottle for every 5 gallons. For larger vehicles, use 1 bottle per 18 gallons of fuel capacity, or 1 oz per 3 gallons.

Size: 6 fl oz. (177 ml).

What does Rislone Octane Booster do?

Antiknock formulation stops engine knocks and pings caused by low-quality fuel.

What is spark knock?

Spark knock, also known as a knock, detonation, knocking or pinging in gasoline engines is when the air/fuel mixture in the cylinder explodes separately from the main ignition caused by the spark plug. This usually creates a metallic “knock” sound as the two fronts collide with each other causing extreme pressure inside the cylinder and possible engine damage.

Does it work with both fuel injected and carbureted engines?

Yes, this formulation works on all fuel injected, direct-injected & carbureted street, racing, supercharged and turbo engines.

What are some signs if I am using fuel that has a lower octane rating than my car needs?

The number one sign is spark knock. You may also have hesitation when accelerating and lower power levels.

Will this harm the oxygen sensors or plug the catalytic converter?

No, this will not harm your engine or any emissions components, including catalytic converters, oxygen sensors, or the EGR valve.

How much do I use?

P/N 4747 / 6 ounce bottle – Pour entire bottle into the fuel tank. One bottle is concentrated to treat up to 20 gallons of gasoline. For smaller engines use 1⁄4 bottle for every 5 gallons. For larger vehicles, use 1 bottle per 18 gallons of fuel capacity, or 1 oz per 3 gallons.

What is MMT?

MMT or Methylcyclopentadienyl Manganese Tricarbonyl is a gas additive supplement octane improver that provides antiknock protection to reduce engine noise and damage from spark knock. It provides an increased octane rating of gas, reduced emissions, enhanced engine life, and protects the engine from damage.

How much will this boost my octane level?

Typical results will increase octane over 20 points or 2 rating numbers.

Can I use it with any type of gasoline?

Yes, Rislone Octane Booster works with unleaded gasoline, ethanol E10 E15 E85 flex fuels, and racing fuel.

What does EZ Nozzletm mean?

The EZ Nozzle is the name for the patent-pending spout end of the bottle. This allows the product to be safely and easily poured into all gas tanks, including capless (no gas cap) systems. Because it is designed like a regular fuel nozzle you would see at your gas station; it allows the product to work in all vehicles.

What does a flow valve do?

The flow valve is built into the EZ Nozzle neck of the bottle and delays the start of pouring to help prevent liquid from spilling and damaging the vehicle finish like other competitive brands.

What is a capless fuel system?

Capless fuel systems go under a few names like Ford’s Easy Fuel System, but basically, it is a vehicle with no regular gas cap. Capless systems are on many vehicles, including Ford, Chrysler, Dodge, GM, Cadillac, and more. The reason the car companies are moving to this system is to prevent fuel evaporation and emissions issues if the gas cap is left loose, not installed, or is lost. Only Rislone fuel additives will work with all capless, obstructed, and regular fuel systems in cars and light trucks. (Source)

Here is the item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

Conclusion to Popular Rislone Engine Treatments, Transmission Treatments, Injector Cleaners, and Fuel Additives Product Range Review

My opinion, based on what I have seen and read is that Rislone are a long running market leader in their field.

Many customers over the years have enjoyed the benefits of using their products for the improvement in performance they desired. Many have subsequently returned again and again, whilst others purchase because their parents or grand parents have done so previously.

All in all by sticking with this well known brand you cannot go far wrong and I am sure you will agree too!

Here is an item from Amazon which may be of interest:


Please note: “As an Amazon Associate I earn from qualifying purchases.”

TAKE ME TO AMAZON.COM

OR

TAKE ME TO AMAZON.CO.UK

Conclusion: Thank you for taking the time to read my article. I hope you have enjoyed this article on the Rislone product range and that the information provided has been of great help to you.

If you have found this page to be of help to you, it would be awesome if you could share this page for me. (Thank you).

Good luck in your future purchases and I hope the item(s) will be much enjoyed.

Legal Information:

BrandedGiftHampers.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com and Amazon.co.uk

BrandedGiftHampers.com also participates in affiliate programs with other sites.

Please note: “As an Amazon Associate I earn from qualifying purchases.”

BrandedGiftHampers.com is compensated for referring traffic and business to these companies.

FTC advertising disclosure:

This post contains affiliate links which are unmarked ads, and I will earn a commission if you shop through them, but your prices will not be affected.

Here is a small selection of the articles you will find on this website:

Some articles from brandedgifthampers.com:-
Pregnancy Gift Basket Ideas – Gift Items For The Mum To Be
Gift Basket Ideas for Wedding – On a day of celebration
Gift Ideas For The Beach – Essentials Needed And Ideas
Whole Foods Gift Baskets – Wholesome Healthier Choice Gifts
Edible Arrangements – Taking Gift Baskets to Another Level
Funny Engagement Gifts – To make your loved one smile
Gifts For Elderly Parents – Your Product Example Guide To Buying
Essential Shopify Products and Services Review
Boyfriend Gift Basket That He Will Truly Appreciate
Awesome Easter Gifts For Toddlers Worth Buying
How To Send Champagne Gift Parcels – Everything You Need To Know
Gift Basket Ideas
Engagement Gift Basket
Hamper Gifts That Can Help Customise And Personalise Your Gift Parcel
Valentine Gift Basket Ideas
Gift Basket Ideas For Nurses – Time To Care For Those Who Care For Us
Gift Basket Ideas For A Baby Shower – Essential Gifts For A Special Occasion
Amazon Gift Baskets – Awesome Choices Await Your Selection
Gift Hampers UK – Ranges Available To Customers In The UK
Retirement Cards For Your Gift Basket Parcel
 
More articles from brandedgifthampers.com:-
Engagement Mugs – Help Them Remember Their Special Occasion
Christmas Gift Hampers UK – Bring Joy This Holiday Season
Delivery Ideas For Birthdays – Gift Basket Choices To Send When You Can’t Go Yourself
Best Sympathy Gift Baskets – In Times Of Sorrow Show You Care
Gift Basket Ideas For Raffle – Always Make A Winning Choice
Family Gift Basket Ideas
Baskets For Gift Hampers – When You Want To Make Your Gift Yourself
Gift Basket Ideas For A Bridal Shower – Gift Items For The Bride To Be
Gift Basket Ideas For Gardeners – Gifts For The Green Fingered People We Know
Bridal Shower Gift Basket Ideas – Gifts For The Bride To Be
Mother Of The Bride Gifts – Gift Items To Boost Your Gift Basket
Gift Baskets For In-laws – Best Way To Keep The In-laws Happy
Baby Gift Hampers – For Customers in the UK
Healthy Snacks – With Which To Build A Gift Basket
Laundry Hampers – Laundry Baskets Are A Necessity For Any Household
Golf Gift Basket – For The Golfing Hobby Enthusiast
Starbucks Gift Baskets – Delightful Coffee Steeped In Flavor
Mother’s Day Gift Basket Ideas – Truly Show Your Gratitude
Vegan Gift Baskets – Life Choices Should Always Be Valued
 
And a few more articles from brandedgifthampers.com:-
Awesome Gift Baskets for Guys –  Worth Considering For Gifts
Gift Basket Delivery – Packaging and Shipping Simple Guide
Cookie Gift Baskets – For the Cookie Lover in Your Life
Gift Basket with Nuts – Can You Handle These Nut Gift Baskets?
Cheap Gift Baskets – Budget Driven Quality Gift Items Guide
Baby Boy Gift Baskets – Quality Gift Items For The Young Man
Baby Gift Baskets – Cute Gifts Your Pride And Joy Deserves
Essential Engagement Gift Box Must-Haves
Personalized Engagement Gifts – That Boost Your Gift Baskets
Engagement Gifts For Couples – Including Gift Baskets Extras
Picnic Baskets – Favourite Types We All Want
Gifts For Man Retiring – Buying Guide With FAQs And Hints
Empty Gift Baskets – For When You Want To Assemble Your Own
Bath And Body Gift Baskets – That Leave You Feeling Pampered
Engagement Party Gifts for Couples – Gifts for Them to Share
Female Retirement Gifts – Gift Items Ladies Love To Receive
Christmas Hampers USA – Celebrate With Your Family & Friends
High-End Gift Baskets – Quality, Quantity, And Suitability
Traditional Engagement Gifts – Gift Baskets That Always Work
Liquor Gift Baskets – Gifts That Warm Your Loved One’s Heart